Tankless Water Heater Repair Acworth
Tankless Water Heater Repair Acworth GA Troubleshooting
Typically, many of the troubles that might accompany a tankless water heater, triggering it to need a repair are external factors. Right here are some of them:
The venting is not right. The most typical mistake is the use of typical B-vent, which can swiftly ruin the heat exchanger due to acidic condensation.
Examine the gas supply line. Occasionally the supply line is undersized and was just connected to the existing line size. The size specified in the installation manual has to be made use of.
The gas pressure is not right. The working pressure must be from 5 to 10 1/2 inches WC for Natural Gas and 9 1/2 to 14 inches for Liquid Propane, relying on the model.
The wrong type of gas that is being used – natural gas or liquid propane. It is not possible to use the non-specified kind.
Water flow or temperature fluctuation issues. There are numerous things we will inspect to make certain they are working properly, like cleaning or changing the input filter, analyzing the check valve, inspecting the seals in the faucets and looking to see if there is a cross flow someplace that must be taken care of.
Hard Water Problems: In locations where the water is really hard, de-scaling will be needed periodically.
Environmental concerns. The heaters need to be installed in a clean area with access to combustion air that is devoid of dust, lint, grease, or chemicals.
Do not hesitate to contact us of any difficulties you are having with your tankless hot water heater, or if you simply need some info on figuring out if acquiring one could be a good solution for your residence.